The Murray Gas Pressure Washer is a powerful and versatile cleaning tool designed for tackling a wide range of outdoor cleaning tasks. With its robust 208cc Briggs & Stratton engine, 3,200 PSI of pressure, and 2.5 GPM of water flow, this pressure washer delivers exceptional cleaning performance. Whether you’re looking to clean your driveway, patio, or even the exterior of your home, the Murray Gas Pressure Washer is a reliable and efficient solution.
Engine Specifications
The Murray Gas Pressure Washer is powered by a Briggs & Stratton CR950 Series engine, which is a 4-cycle, 208cc powerhouse. This engine is known for its reliable performance and long-lasting durability. Some key specifications of the engine include:
- Displacement: 208cc
- Fuel Type: Gasoline
- Fuel Tank Capacity: 0.95 gallons (3.6 liters)
- Oil Capacity: 20 oz (0.59 liters)
- Recommended Oil Type: SAE 30 or 10W-30 engine oil
- Recommended Octane Rating: 87 (regular unleaded gasoline)
It’s important to use the recommended fuel and oil types to ensure optimal engine performance and longevity. Using higher octane fuel or the wrong oil type can lead to issues such as decreased fuel efficiency, increased emissions, and even engine damage.
Pump Specifications
The Murray Gas Pressure Washer is equipped with a high-quality axial cam pump that delivers impressive cleaning power. The key pump specifications are:
- Maximum Pressure: 3,200 PSI
- Maximum Flow Rate: 2.5 GPM
- Pump Type: Axial cam
- Pump Material: Aluminum
- Pump Warranty: 2 years
The adjustable pressure control on the pump allows you to fine-tune the cleaning power to suit your specific needs, ranging from 300 PSI to 3,200 PSI. This versatility makes the Murray Gas Pressure Washer suitable for a wide range of cleaning tasks, from delicate surfaces to heavy-duty grime removal.
Frame and Accessory Specifications
The Murray Gas Pressure Washer features a durable, fully welded steel frame that provides a sturdy and stable platform for the engine and pump. Some additional specifications include:
- Frame Material: Welded steel
- Wheel Size: 10 inches
- Wheel Type: Pneumatic
- Hose Length: 30 feet
- Spray Wand Length: 36 inches
- Spray Nozzles: 0°, 15°, 40°, and soap nozzle
The large 10-inch pneumatic wheels make it easy to maneuver the pressure washer over uneven terrain, while the 30-foot high-pressure hose provides ample reach for cleaning larger areas. The included set of quick-connect spray nozzles allows you to adjust the spray pattern to suit the task at hand, from a focused high-pressure stream to a wide, low-pressure fan for delicate surfaces.
Maintenance and Troubleshooting
To ensure the long-term performance and reliability of your Murray Gas Pressure Washer, it’s important to follow the recommended maintenance schedule and address any issues that may arise. Here are some common troubleshooting tips:
Leaking Oil and Thick White Smoke
If you notice oil leaks or thick white smoke coming from the engine, there are a few potential causes and solutions:
- Check Oil Level: Ensure the engine oil is at the recommended level. Top up the oil if necessary, but do not overfill.
- Inspect for Leaks: Carefully inspect the engine and pump for any visible signs of oil leaks. Tighten any loose fittings or replace damaged seals as needed.
- Perform Regular Maintenance: Regular oil changes and engine maintenance, as specified in the user manual, can help prevent oil leaks and engine issues.
- Consult the Manual or Contact Murray: If the issue persists, refer to the user manual for further troubleshooting steps or contact Murray’s customer support for assistance.
Preventing Carburetor Issues
Carburetor issues can be a common problem with gas-powered pressure washers. To prevent these issues, follow these tips:
- Use Recommended Fuel: Always use fresh, high-quality regular unleaded gasoline with an octane rating of 87 or higher. Avoid using stale or contaminated fuel.
- Maintain Air Filters: Regularly clean or replace the air filters to ensure proper airflow and prevent debris from entering the carburetor.
- Store Properly: When not in use, store the pressure washer in a dry, well-ventilated area to prevent moisture buildup, which can lead to carburetor issues.
- Consult the Manual: Refer to the user manual for specific maintenance and troubleshooting steps related to the carburetor and fuel system.
By following the recommended maintenance procedures and addressing any issues promptly, you can ensure your Murray Gas Pressure Washer continues to deliver reliable and efficient performance for years to come.
References:
- Toolmart Inc. – Murray 3200PSI 2.5 GPM Gas Pressure Washer With Briggs & Stratton Engine Factory Serviced. https://toolmartinc.com/products/murray-3200psi-2-5-gpm-gas-pressure-washer-with-briggs-stratton-engine?srsltid=AfmBOorW4aPKXO7op-_vyy7uXI3lCavRF1-2seqy41kIH-nvoqiC-u3l
- Theisen’s – 3200PSI 2.5 GPM Gas Pressure Washer With Briggs & Stratton Engine. https://www.theisens.com/products/murray-3200-psi-25-gpm-gas-pressure-washer-with-briggs-stratton-engine?srsltid=AfmBOopKjx4TjiO-s0AP2IEeSyvMb851Vjd_SL1NXUsQmCOUUODargiG
- Busy Beaver – Murray 3100psi Gas Pressure Wshr. https://shop.busybeaver.com/products/murray-3100psi-gas-pressure-wshr-4512.html